Embroidered with the 14 1/2" Quilter's Square Hoop-It-All (Item #151) on the Brother ULT 2002/2003 embroidery machine. The design is #3 from the Brother design card 45. It was resized through embroidery Software to 145mm x 145mm. It was repeated four times by first embroidering the top right and then flipped for the bottom right. The Sliding bracket provided with the Quilter's Hoop-It-All was slid and locked into place for each location. After the right side was completed the locking screws on the Sliding Bracket were loosened and the frame was removed and then re-attached to the opposite side with the fabric still on the frame. The same image was then mirrored and flipped as needed for each location. ALL THE EMBROIDERY WAS DONE IN ONE HOOPING.