For the Kenmore 19010 we have a Medium Cap / Hat Hoop (item# H351) with an outer dimension of 7-1/2" x 8-1/2" and a sewing field of 4" x 5" (MSRP $129.99 USD). Sears hasn't purchased any hoops for resale and we haven't had enough orders to produce Giant Hoops for it.
You can embroider any cap style on our Medium-, Big-, or Multi-Purpose Hoop-It-All Cap / Hat Hoops.
The following two Janome MC10001 Hoop Kits: the Giant Long Hoop Kit (7-1/2" x 18") with support table (item# H418), and the Double-Wide Hoop Kit (11" x 14") with support table (item # H419), both priced at MSRP $240.10 USD, can be attached and used on the Kenmore 19010, but the sewing field is smaller than the Janome MC10001,and won't fill up the complete hoop area. Please see our MSRP Product Catalog for more information.
Call your local Janome dealer to see if they have any MC 10001 Hoop Kits in stock for demonstration on the Janome machines, which would work the same as the 19010.
We are producing three Hoop Kits for the Pfaff 2170, 2140, 2144, and 2134 machines.
The first is the Big Cap / Hat Hoop Kit (item# H504) which provides a 7-7/8” x 15-7/8" hoop with a full design sewing field of 5.5" x 8.8" (40 x 225 mm).
The Mounting Bracket (with magnetic sensor) is removable and slides off to be used on the other side of the hoop. The sliding mounting bracket can also be used on the Giant Super Long Kit (item# H507) 23.6" x 7.9" (596 x 200 mm) outside dimension, including support table. This will give you 2 full size design fields, end-to-end, of 5.5" x 17.2" (437 x 140 mm) with a 10 mm overlap for splitting designs.
The Bracket will also fit our Double-Wide Hoop Kit (item# H510) with a 12" x 15.25" OD and a 8.86” x 9.84” sewing field. This kit includes a support table.
Because of the factory hoop's magnetic sensor and its location, we cannot make a Sliding Rail Mounting System like we have on all the other brands. Our mounting bracket—with magnetic sensor—is removable and slides off and can be used on all three Hoops.
Because our mounting bracket can be used on all three hoops, if you wish to purchase another hoop, you can save the cost of buying another bracket table and buy just an extra frame only if you wish.
The new Janome MC 11000 cannot use any Hoop-It-All designed for other Janome sewing machine models. The sewing field, machine dimensions, and mounting bracket method have changed.
We now have three new Hoop-It-Alls available for this machine—a Medium Cap / Hat, a Big Cap / Hat, and a Macro Double-Wide. We are also developing a 23” Super Giant Long Hoop-It-All, which should be available by February 22, 2007 or sooner. This hoop makes it possible to embroider up to 20” within the embroidery frame without the need of re-hooping the fabric or removing the frame off the machine.
The complete kit for the Memory Craft (MC) 11000 will be shipped with: a small embroidery table, instructions, alignment template, and SIA. If you own a MC 11000 CLOTH SETTER, the small table included with the complete kit can be attached to the Cloth Setter to better support the Macro Double-Wide Hoop.
The Janome MC 9000, 5700, and 5000 Giant Long will not fit on the Janome MC 10001 or any of the previous machines. Janome changed the attachment on the back of the embroidery unit (which fits on the top), so only the Cap / Hat Hoop is interchangeable.
We had to develop a different rail system for the Giant Long and Double-Wide Hoops for the Janome MC 10001, 10000, 9500, and 300 type machines.
You can use the Giant GR8 Double-Wide Hoop Kit (item# H420) 9.9" x 16.25" (248 x 420 mm) and the Giant 12" Square on the Janome 9000, 5700, and 5000 machines. There are four hoop choices. Once you purchase the complete kit, you can add an additional frame-only if you wish.
For Singer CE 200 and CE 100 we offer a Medium Cap / Hat Hoop Kit (item# H703) and a 23" Giant Super Long Hoop Kit (item# 753), which is listed online;
The Singer CE 200 and 100 12" Square and the 12" x 23" Double-Wide Hoop Kits are now in production with back order shipments beginning at the end March 2007.
The Baby Lock Ellageo 1, 2, or 3 has a larger sewing field and is not interchangeable with the Esante 1 or 2 which has a different mounting bracket and table.
But, the New Ellageo BLL and the New Esante 3 (BLN) hoop kits are interchangeable, as the sewing fields are now the same. Though they use the same hoops as the Ellageo 1, 2, and 3 and the Brother ULT series, the mounting brackets and the tables are different from earlier models.
The Brother PE 100 Medium Cap / Hat Hoop (item# H101) also fits the Bernina 500 and the Baby Lock Espree 1. It won't fit any later versions as the sewing field is 3.9" square.
New 10" Square Hoops
This is a new hoop frame that is available for all the machines listed below.
Hoop Kits for these machines are now shipping. The sewing field is completely filled in with these new 10" Square Hoops (unlike the 12" Square Hoops).
This 10" Square Hoop uses the same mounting bracket and table that all of the 12" Giant Hoops use.
The later versions have a 4.3" square sewing field which completely fills in, but the 3.9" earlier versions may not.
The following machines use the 4.3" Hoop Kits: Baby Lock Espree 2, EM1, BL60e, ACCENT, EAC; Brother PE, 200, 170, 180, 150; Bernina 600, 650, EM! (eMOTIONS!); SimplicitySE3X, 2, 1; White 4400, and 3300.
We now have two Double-Wide Hoop Kits for the Brother 8500, 8200, 6500 and the Brother Innovis 1000D, PE700; plus the Baby Lock Ellure and the New Ellure BLR machines—the Super Double-Wide 12-1/8" x 23" Hoop Kit and the Giant Quilter's 12-1/8" Square Double-Wide Hoop Kit. We also have a Giant Long 7-½” x 16” Hoop Kit for them and the Cap / Hat Hoop Kit.
These kits include: extension support table and extension cable (excluding Giant Long and the Cap / Hat Kit), alignment template, instructions and a sample roll of SIA (adhesive stabilizer).
The sliding mounting bracket for Brother Innovis 4000 and Baby Lock Ellegante is available and can fit on the Brother ULT and Baby Lock Ellageo Giant Hoops. If you use the Hoop for the ULT or Ellageo on the new Innovis 4000 D or Ellegante you won't be able to obtain the full sewing width that the new machine is capable of. The new machine SEWING FIELD is WIDER and LONGER than the previous one and there is the possibility of the needle hitting the frame. You can do it if you are careful and trace the outline of each project before doing the embroidery. If you program your machine for the smaller hoop then you don't have to worry about the needle hitting the frame.
The Double-Wide Tables are NOT interchangeable however. You MUST have the Table Base and Cable Assembly for the 4000 D or Ellegante. The Table Front and Back from your ULT and Ellageo won't fit exactly, though they might provide sufficient support. If you purchased a ULT or Ellageo Double-Wide Kit for use on both machines, the above conditions should be considered.
The Brother ULT Cap / Hat Hoop has a MOUNTING BRACKET with three mounting screws. The Brother Innovis 4000 D and the Baby Lock Ellegante has the same screw locations, so the 4000 D Mounting Bracket can be installed on the ULT and the Baby Lock Ellageo Big Cap / Hat Hoop, but the Mounting Bracket is slightly wider. So you will have to remove (file or cut) a small portion of the plastic stiffener that will prevent the new bracket from being attached. We will change our 4000D, Ellegante bracket widths, by March 9th, so they will fit without modification of the ULT and Ellageo frame.
Viking would rather you buy one of their hoops, not ours, so they only approve their own. They are currently considering selling our hoops in the USA. Our Hoop attaches the same way, but our Bracket is made of Delrin (superior material). Our hoops and tables are made of ABS plastic (the same as foot ball helmets).
Our website lists six choices of hoop kits for the Viking Designer D1, 2, and SE . (If you click on it you will see some of your options.) We have over 400 pages devoted to our products with many pages about Viking machine hoops.
After you purchase one kit you may purchase an optional frame. The "frames-only" are available as an option with individual instructions, alignment templates, and a sample roll of SIA for each frame when purchased individually.
All of the Viking Designer 1 or 2 Hoop Kits, with the exception of the Table Spacing Base, can be used with the Viking SE machine. The Mounting bracket can also be used with the Cap / Hat Hoop and well as the Giant Super Long Hoop, which has it's own table and base. If you wish to use the Super Long table on the SE also, then you would need to purchase the SE Table Base.
The Double-Wide Frames are 14-1/4" wide which gives you a 11-7/8" wide sewing field. The 12" hoop frame on our website is for the smaller sewing field machines such as the Viking Rose and has a 10-1/4" wide sewing field. The table, mounting bracket, alignment template, instructions and stabilizer, included with your hoop, are described on our site.
The Frames for the Bernina Artista, Aurora, and the Viking Designers are interchangeable.